Sofar RS485 USB Cable (Bare-Ended)

A bare-ended RS485 lead for Sofar hybrid inverters. Fit the ferruled ends into the inverter's COM plug or RS485 terminals, and plug the USB end into your monitoring computer.

• Should fit Sofar HYD hybrids (COM plug) and ME3000SP (485s-A / 485s-B terminals)
• Twisted pair with ferrules, plus an optional ground wire
• On HYD COM plugs, community guides use pin 1 for A+, pin 4 for B- and pin 12 for ground. Confirm this in your manual
• Modbus RTU at 9600 baud, 8N1, address 1 is typical

Brand names are trademarks of their respective owners and are used only to describe compatibility. InverterMan is not affiliated with or endorsed by any manufacturer. Check your inverter manual for the port and pin layout before connecting, and isolate the inverter before opening any cover. Ask us if unsure.