Sunsynk/Deye RS485 USB Cable

Get live data out of your Sunsynk/Deye inverter and into Home Assistant, ESPHome or your own software. This lead goes from the inverter's RJ45 RS485/BMS port to a USB RS485 adapter, wired for Sunsynk/Deye's pinout.

• Should fit Sunsynk and Deye hybrid inverters with an RJ45 RS485 port
• USB RS485 end, no drivers needed on most Linux/Raspberry Pi setups
• No radio, no cloud, just a wire

Check your inverter manual for the port and pin layout before connecting. Ask us if unsure.